MI

Hardware Engineer (Smart Electricity Meters) – Lead/Principal

Mindteck (India) Limited
Noida ₹30-40 LPA Posted 11 Nov 2026
FULL TIME
Hardware Engineer

Job Description

Role Summary

  • We are seeking a Lead/Principal Hardware Engineer with strong, hands-on experience in smart electricity meter hardware design and development.
  • This position includes end-to-end ownership of hardware design and validation for single-phase and three-phase electricity meters, spanning Whole Current (WC), Low-Tension Current Transformer (LTCT), and High-Tension Current Transformer (HTCT) variants.
  • The successful candidate will manage schematic design, multi-layer PCB design, metrology circuits, power supplies, hardware bring-up, debugging, validation, and support EVT/DVT/PVT builds through to production.

Key Responsibilities

  • Lead the design and development of metering hardware using energy-measurement AFE/ICs, including Analog Devices ADE7953 for single-phase metering and ADE7880, ADE9078, ADE9000, or equivalent devices from Microchip, STMicroelectronics, Texas Instruments, or other vendors for three-phase and power-quality applications.
  • Develop current-sensing front ends tailored to WC, LTCT, and HTCT meter variants using shunts, current transformers (CTs), and Rogowski coils, as applicable.
  • Create voltage-sensing circuits using precision resistor dividers, including PGAs, anti-aliasing filters, signal-conditioning circuits, and calibration interfaces.
  • Execute schematic capture and multi-layer PCB design using Altium Designer and/or Cadence OrCAD/Allegro, Mentor PADS, or KiCad.
  • Own component selection, BOM creation, PCB stack-up definition, design-for-manufacturing (DFM), and design-for-test (DFT) initiatives.
  • Design and validate metering power supplies, including SMPS and/or capacitive dropper power supplies as required by the product architecture.
  • Define and implement appropriate isolation between high-voltage and low-voltage domains, meeting creepage and clearance requirements per applicable standards such as IEC 60664-1.
  • Implement surge, ESD, EFT, and other protection mechanisms to enable dependable meter operation and regulatory compliance.
  • Lead hardware bring-up, debugging, characterization, and validation activities from prototypes through production.
  • Plan and conduct EVT, DVT, and PVT builds in collaboration with EMS/CM partners.
  • Define and support production jigs, fixtures, automated/manual test stations, and hardware validation setups.
  • Support conformal-coating selection and validation where required.
  • Collaborate with firmware, software, mechanical, manufacturing, quality, and certification teams to resolve hardware and system-level issues.
  • Assist with regulatory and certification testing, including accuracy, type testing, EMC/immunity, surge, ESD, and environmental qualification.
  • Support compliance with relevant Australian and Indian metering standards and technical specifications.

Required Technical Skills & Tools

  • Hands-on experience in smart electricity meter hardware design, preferably across both single-phase and three-phase meter platforms.
  • Strong experience with metrology AFE/ICs such as ADE7xxx/ADE9xxx or equivalent devices from Microchip, STMicroelectronics, Texas Instruments, or other energy-metering IC vendors.
  • In-depth knowledge of energy measurement fundamentals, including voltage/current sensing, active/reactive/apparent energy measurement, phase measurement, calibration, and accuracy requirements.
  • Practical experience with current-sensing techniques including shunt, CT, and Rogowski coil implementations.
  • Strong analog, digital, and mixed-signal circuit design and troubleshooting capabilities.
  • Altium Designer proficiency is preferred. Experience with Cadence OrCAD/Allegro, Mentor PADS, or KiCad is also beneficial.
  • Experience using LTspice, PSpice, or equivalent circuit simulation tools.
  • Strong knowledge of power-supply design, including SMPS and capacitive-dropper architectures.
  • Good understanding of HV/LV isolation, creepage and clearance, surge protection, ESD/EFT protection, and EMI/EMC mitigation.
  • Experience in PCB stack-up design, signal and power integrity, thermal management, component derating, and reliability considerations.
  • Experience in creating and reviewing engineering documentation, including:
  • Schematics
  • BOMs
  • Gerber/ODB++ files
  • PCB fabrication and assembly drawings
  • Test procedures
  • Hardware validation plans and reports
  • Design specifications

Qualifications & Experience

  • B.E./B.Tech/M.E./M.Tech in Electronics & Communication Engineering (ECE), Electrical & Electronics Engineering (EEE), or a related discipline.
  • 6+ years of relevant experience in electronics hardware design, ideally including substantial experience with smart electricity meters or metering equipment.
  • Proven experience taking hardware products through the full development lifecycle—from architecture and schematic design through PCB development, prototype bring-up, validation, certification, and production.
  • For Lead/Principal-level candidates, experience leading technical efforts and mentoring junior hardware engineers is desirable.
  • Strong analytical, debugging, problem-solving, documentation, and cross-functional collaboration skills.

Domain Knowledge – Australian & Indian Metering Markets

Candidates should have a strong understanding of applicable electricity-metering standards and market requirements, including:

  • Australian Market
  • AS 62052.11 – General requirements for electricity metering equipment.
  • AS 62053 series – Particular requirements for electricity meter accuracy and performance.
  • NMI M 6-1 – Pattern approval requirements for electricity meters.
  • Meter accuracy classes such as 0.2S, 0.5S, and 1.0.
  • Understanding of Whole Current (WC), LTCT, and HTCT meter architectures and applications.
  • Metering accuracy, calibration, measurement uncertainty, and metrology principles.
  • EMC, immunity, surge, environmental, and safety requirements applicable to electricity meters.
  • Indian Market
  • IS 16444 Part 1 – Smart meters for whole-current applications.
  • IS 16444 Part 2 – Smart meters for transformer-operated applications, including relevant accuracy classes.
  • IS 15959 and applicable CEA technical specifications for smart-metering systems.
  • Familiarity with Indian utility requirements and meter-testing/certification processes.

Nice to Have

  • Experience with DFMEA, FMEA, reliability analysis, and design-for-reliability practices.
  • Knowledge of signal integrity (SI) and power integrity (PI).
  • Experience with RF/antenna PCB layout, especially for cellular communication modules used in smart meters.
  • Experience designing tamper-detection circuits, including magnetic tamper, reverse energy/reverse power (REVP), neutral disturbance, and related detection mechanisms.
  • Experience with thermal design, component derating, and environmental reliability.
  • Experience with conformal coating and its impact on PCB design and manufacturing.
  • Understanding of IP54/IP65 enclosure requirements and coordination between electronics and mechanical enclosure design.
  • Experience working with EMS/contract manufacturers and managing NPI activities.
  • Prior experience working with a smart-meter OEM or electricity-meter manufacturer is highly desirable.

foundit: Feeling underpaid? Find jobs that pay you what you are worth. Find jobsSponsored

Required Skills

Join WhatsApp Channel